DIY Ombre Office Chair Slip-cover

So while black friday shopping, I was looking for a desk chair for when my dad and I finish making my desk and found this at a local thrift store for $13:

And of course I had to buy it considering I was looking into $40 chairs that look the same.

But I wasn't too fond of the print. Don't get me wrong, it's cute, but not exactly my taste. Lately I've been into ombre, and thought I would try dip dyeing some fabric for the first time for this project.

Considering it was my first ombre project, I think I did a decent job (Maybe?).

Materials I Used:

Two 25" x 23" pieces and two 23" x 17" pieces of white fabric -  or Add 7 inches to the length and width of your fabric
(I used Muslin which may have not been the best option but it worked well enough, and it was on sale!)

String or Cord

Fabric Dye

Bucket

Gloves

***I used two pieces of fabric because my fabric was sheer. You may only need one of each depending on your type of fabric. I only dyed one of each measurement and left the other all white.***

First, you'll need to dye your fabric. I used Teal Rit Dye. 

Boil 2 gallons of water and put it in a bucket/container. Pour 1/3 cup of your dye into the mixture and stir.

Put your fabrics about halfway in or to where you want the color to start. Let it soak for about five minutes.

After the five minutes, pull your fabric up to where you want the next color to go. Add another 1/3 of a cup and stir. Let it sit for 3-5 minutes.

Pull out your fabric some more and add another 1/3 of a cup. Let it sit for 3-5 minutes.

If you have a longer chair or you need a longer piece of fabric, you can add more layers of color by adding more die.

Pull the fabric out of your container and squeeze it out (make sure to wear gloves!) as much as you can and wash it in cold water. Hang over a bucket or the tub to dry out a little bit.

Now wash in the washer for a couple of minutes and hang to dry.

Once it is completely dry, line up your fabrics. Make rounded corners and pin for a 1-1/2 inch casing.

Sew. Don't worry too much if your fabric bunches up a little, the edges will be underneath the chair anyways.

Now, don't be stupid like me and forget to make a buttonhole before sewing the casing! If you do just cut a makeshift hole. Tie some string or cord to a safety pin and feed it through.

Fit your cover over your chair. Pull the string/cord as tight as you can and tuck the extra underneath the cover.

And now you have an almost new chair! :)

Special thanks to craftyjules.weebly.com for the inspiration on this project! She's amazing!

If you have a question I'd love to help :)

DIY: Collared Tank Top from Old Blouse

Hi everyone! I'm so excited to post my first tutorial! Today I have a SUPER EASY one - And you don't even need a sewing machine. It's all hand sewing!

So my mom was about to give this shirt away:

And I stopped her because I knew I could do something with it, and I was right!

Materials Needed:

Old Blouse

Scissors

Sewing Kit with coordinating thread

First off I want to apologize for the bad quality photos.. I originally intended for this to be a video, so the pictures are screen captures from the video.

First off, cut out any shoulder pads if your shirt has some. I then cut a straight line to the seam where the sleeve meets the rest of the shirt.

I then cut out the rest of the sleeve, be sure not to cut off the seam!

Once you cut off both sleeves, your shirt should look something like this (if you cut it as poorly as I did)

Now I didn't have a picture for this so hopefully you'll understand. You're going to flip your shirt inside out, and fold back the sleeve to where you want to hem it.

Once you have it folded back, go ahead and press it.

Now it's time to sew! Just start the seam putting the needle through the flap of fabric you created. Using a simple basic stitch, continue to sew all the way around the circle. Try to stay as close to the edge towards the hole (if that makes sense) as possible. Tie off and secure your stitch and trim any excess fabric or thread.

And now you have a new tank top costing little to nothing depending on your materials!

Hope you enjoyed this tutorial!